How many people fail cpat

Survey information was entered into an electronic data file and checked for accuracy. This process showed 99 percent data entry accuracy. Survey data were linked to applicant age, sex, race, codes for identifying individual progress through the applicant process and the CPAT pass or fail information. There were 1, individuals who initially applied to be firefighters in Indianapolis between August 14 and September 1, The majority of the initial applicants were white Of the initial applicants, about two-thirds Overall, one-quarter The overall applicant dropout rate appears to be affected by the level of self-reported activity at the point of initial activity.

Of the who returned to take the written test, About one-fifth Of the taking the written test, Of the who passed the written examination, Of the invited to take the CPAT, actually did Of the applicants who attempted the CPAT, passed The CPAT pass rates varied by applicant gender, age, race, and the self-reported level of physical activity at the time of the initial application, as presented in Table 1.

There were statistically significant differences in the CPAT pass rates by gender. Of the male applicants who took the CPAT, 90 percent completed it successfully, compared with 50 percent of the females. The pass rates were higher among the younger applicants, but the differences were not statistically significant.

Slightly more white applicants than black applicants passed Of the applicants who were vigorously active at the time of the written test, more were likely to pass the CPAT Assessment of applicant satisfaction with the CPAT training program included an evaluation of usefulness, understandability, and fairness of the training materials Table 2.

In general, the majority of the applicants who took the CPAT felt that the training materials were useful, understandable, and fair. If you train regularly with a weighted vest, the CPAT should be fairly easy for you. To train with the vest is simple, just put it on and walk up and down stairs or hills for 10 to 30 minutes.

It acts as a type of interval training because when you climb the stairs, you are working hard, when you are coming down it is somewhat easier. Walking should be enough. You can make it harder by going up steeper or longer hills, more flights of stairs, or training for a longer session. You can even work up in weight, as many of the vests allow you to remove weights to adjust the difficulty. I still have this and use it as part of my regular training.

It is still in great shape and should last a long time. You can get it in different weights, I choose 60 pounds to mimic the weight of my real firefighter gear and that is what I recommend. This vest seems expensive, but it is the best value I found.

You can find cheaper ones, but not at the 50 to pound range that I wanted. Just think of it as an investment in your future career and long term health. This is a little lighter at 40 pounds, but at just over half the cost, it is a good deal. It can be as simple as putting weight in a backpack though this is very uncomfortable.

Here is a video about a guy who made his own vest when training to become a firefighter. Hence, it is no surprise that learning how to pass this physical test is very important to aspiring firefighters.

From this wealth of veteran firefighters, we get a detailed test format with eight parts designed to mimic different aspects of real firefighting. Here, you get eight events in one test that mirror all the physical demands of being a firefighter. Hence, to give yourself a shot at sailing through the CPAT, you must prepare for each part of the test.

Hauling items into, out of, and around buildings as well as extensive use of stairs is a vital component of active firefighting. We need to be fit enough to carry all our tools, while wearing full gear, up a high rise building, and still have energy left to work when we get there!. Hence, it should come as no surprise that the first event in the CPAT is a stair climb. This part of the test simulates the task of hauling hose bundles or high-rise packs up several flights of stairs while in full personal protective gear and carrying breathing apparatus.

To achieve this aim, test participants must wear a required pound vest as well as a pound shoulder block on each shoulder for the entire duration of the climb. The event starts with a twenty-second warm-up climb on a StepMill stair climbing machine at fifty steps per minute. Here, you get the opportunity to familiarize yourself with the stair climber as you can hold on to the railing of the machine for improved balance. You get two trial attempts with the warm-up climb, during which you must complete the ascend or fail the entire test.

Once you complete the warm-up session, you must immediately jump into the main event: a three-minute climb at 60 steps per minute with minimal use of the support railing.

Here, dismounting or falling off before time or grasping the support rail after receiving two warnings will get you disqualified, forfeiting the entire test. The key to acing this part of the test is extensive step training; the more pre-test stair mileage you accumulate, the better.

Your options for training grounds include a stair-climbing machine, a staircase within a building, or a flight of stairs at a stadium or other arena. To get the most out of your stair-climbing training program:. Like we talked about above, here is where a weighted vest can make such a difference. Training by climbing stairs is great, but you need to train to do it when you are weighed down.

A backpack can work, but a weight vest is better. The next event in the series simulates another essential part of active firefighter duty: managing the hose-line. Water weighs 8. Even dry hose has a ton of friction on the ground and can be a lot of work to move around.

This event typically includes the following steps:. Potential causes for failure in this event, and by extension the entire CPAT test, include:.

To train for this event, you need at least 50 feet of rope and either a weighted bag, a cement block, or a tire. Make sure you start with small weights — around pounds, depending on your comfort level — and adjust the load to where you can match the required reps.

You can increase the weights gradually until you can handle 80 pounds, which is close to what you will use on the actual test. For the best training experience, perform this program on flat surfaces like a driveway or parking lot. I would train your leg strength with squats and deadlifts, as well as, make sure you have good cardio. For active firefighters, carrying and handling power tools is an essential part of the game.

Firefighters often have to work with equipment like chain saws, fire axes , and halligans. In the third CPAT event, you get a practical test of your ability to handle similar tools. Throughout the event, you have the option to stop and adjust your grip on the saws for a more efficient carry, as the primary aim of this task is to ensure maximum control of the power tools at all times.

Hence, if you drop the saws at any point during the test, you automatically fail the entire CPAT. Furthermore, you must walk — not run — for the whole duration of this event. Running after one warning will get you disqualified from the entire test. You can easily simulate this event. Just use two dumbells, kettlebells or other heavy objects of equal weight.

Pick up one in each hand and walk, under control. Increase the weight, distance, and number of laps as you get stronger. This event simulates the use of ladders by firefighters in hazardous environments. Hence, to succeed in this event, you must complete the full raise of a 24ft extension ladder from the ground along a designated vertical surface. To successfully pass this section of the test, you must maintain full control of the ladder and the halyard rope at all times, keep the ladder within the marked boundaries, and touch every rung during the raise.

Straying from these guidelines after one warning results in disqualification from the entire test. This event is mostly about shoulder, leg and core strength. This website uses cookies.

By continuing to use this site, you accept our use of cookies. Becoming A Firefighter Program. Firefighter Strength Program "I feel Markell's program is very effective. Click here for more. One on One Firefighter Interview Prep "Before interview prepping with Markell, I was struggling to get my feelings and responses to connect to relative events for my firefighter interview.

About Us. Mission Statement To provide the tools and support necessary to develop undeniable firefighter candidates for the fire service. Our Goal To help develop as many elite firefighter candidates as possible for the fire service. More about us. Email Address. Help Our Cause Your support and contributions will enable us to meet our goals and assist us in changing the lives of fire candidates in our communities. Donate Now.