Srs light what does it mean

In some cases, it is also possible that there may be something wrong with the sensor that detects whether your seatbelt is fastened or not. The best way to avoid a potentially life-threatening scenario is to take any questionable dash lights to be inspected by an auto specialist. It may be that substantial repair work needs to be done. It could also be that the sensor is malfunctioning and needs to be replaced.

Or, the SRS light may simply need to be reset on your dash. It may be an attractive notion to simply skip over this issue and let time pass before you finally decide to get it checked out, however, this issue could be relatively inexpensive to fix, and it is important to not leave your safety, or the safety of your passengers, to chance.

The first step you need to take toward ensuring your safety is to call your local trusted mechanic shop to make an appointment for a diagnostic service. It is important that you find professionals who you can trust to assess the issue.

SRS system is critical in the event of accident When looking for potential vehicles to purchase, it is likely that one of the criteria included that the vehicle have adequate safety features. If the light goes out, then the system is ready. If the light stays on, there is a fault somewhere in the SRS system. The system is disabled at this point.

In the case of a collision, the airbags will not deploy and the seat belts will not tighten, nor will any additional features activate. If the SRS light stays on after the self-test, then you should take the vehicle to a qualified repair shop to be properly diagnosed and inspected. If the insurance company determines that the SRS system was in a fault mode for what they consider to be a long time, they may not be willing to cover any injuries, especially if they determine that a working airbag system would have prevented the injuries.

If the SRS light is blinking or stays on, take it seriously. When the enabling criteria have been met—such as a vehicle speed above 25 MPH and a highly abnormal rate of deceleration—the SRS system will choose which, if any, airbags to deploy and which seat belts to pull tight. The purpose of the airbags is to cushion or prevent the vehicle occupants from hitting and slamming their body parts, especially the head, into the steering wheel or dashboard.

The seat belts tighten in order to restrict the forward movement of the vehicle occupants. Many newer vehicles have side airbags to protect the vehicle occupants from hitting the side pillars, especially with their heads. However, if something malfunctioned, causing your airbags to fail, a fault will be sent to the computer. The result is the SRS light telling you that the computer needs to be reset.

Over time, all electrical components fail. The SRS computer is no different and is not immune to malfunctioning. Heat, excessive vibration, age and water damage can all lead to its demise. You should never just turn off the SRS light.

The only time you should reset the SRS light is after you repair the initial problems. However, not all scanners come with this capability. Before you purchase one, make sure it can read and erase SRS codes. Your vehicle will still operate with the SRS light on. We recommend getting to the service station immediately to find out what the problem is.

If you have a code scanner, you might be able to read the DTCs yourself. Additionally, driving with the SRS light on could cause trouble with the insurance company. SRS light repair costs vary greatly depending on what the problem is. If your issue is something simple such as debris in the seat belt latch, you might just need some compressed air to resolve the situation. However, it could also be due to a failed airbag assembly, which could cost into thousands of dollars.

The only way to know for sure is to have the codes scanned and get an estimate. Ask any car question in our new community! Magnus is the owner and main author of MechanicBase. He has been working as a mechanic for over 10 years, and the majority of them specialized in advanced diagnostics and troubleshooting. Certified Automotive Diagnostic Technician. So my SRS light was on. Then I look and it is off. Seems odd. I have a Honda Accord. Why would it go on and off sporadically while I'm driving?

Hi I had to have my altenator replaced. Right after my SRS signal was on.